Guide | How to Flash - Install New Firmware on Samsung GALAXY NOTE 4 With ODIN v3.11.1

Flash Stock Firmware Samsung GALAXY NOTE 4. This guide below will show you How to Flash New Firmware on Samsung GALAXY NOTE 4 With ODIN v3.11.1. But if you want to upgrade your device firmware we highly recommend you using Samsung’s own utilities OTA (Over-the-air) or Samsung Kies. Follow this guide only if you sure 99.91% about risks involved in flashing your Samsung GALAXY NOTE 4 device.

There are some versions of Samsung GALAXY NOTE 4, N910W8 (North America), N910F (Europe), N910U (Hong Kong, Taiwan, Australia, New Zealand, Chile), N910C (Asia, Europe, South America); N910FD (United Arab Emirates); N910FQ (Turkey); N910H (Asia-Pacific); N910G (Singapore, India, Australia), N910K/N910L/N910S (Korea). This device is released on 2014, September. S amsung GALAXY NOTE 4 is the smartphone with 5,7 Inches Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v4.4.4 (KitKat), upgradable to v6.0.1 (Marshmallow), Powered by Quad-core 2.7 GHz Krait 450 CPU, Qualcomm Snapdragon 805 chipset, Adreno 420 GPU, combined with 3 GB of RAM and 16 MP of  Main camera and 3,7 MP on secondary camera. 

Prerequisite.

Below is the following things you must do before flashing your Android Samsung GALAXY NOTE 4 device.

1. Make sure your Samsung GALAXY NOTE 4 is fully charged. or minimum has 88% of battery capacity. It will avoid the flashing failure process.
2. Flashing process will delete or wipe all data stored in internal memory. So, dont forget to backup all data before flashing device.
3. Make sure you have installed a latest of the Samsung driver, that support with your device, If you dont have, you can download here 

http://www.mediafire.com/download/p6pplwvwtc9y4kk/SAMSUNG_USB_Driver_for_Mobile_1.5.5.0.rar

4. Original USB cable driver for your Samsung GALAXY NOTE 4.
5. Download Odin V3.11.1, Here. 

http://dl.sammobile.com/Odin3-v3.11.1.zip

6. Firmware Download. (use one of the 3 methods below to download Samsung Firmware)
• One. Download Official firm ware file for the model number of your device, download it from - SamMobile, or you can visit http://samsung-updates.com/
• Two. Guide How to Download Official Samsung Firmware From SamMobile. Here 

http://blogspot.com/2016/08/guide-how-to-download-official-samsung-firmware.html

• Three. Firmware Samsung GALAXY NOTE 4, you must Log In to download firmware via this link below.

http://blogspot.com/2016/10/official-firmware-stock-rom-samsung-galaxy-note-4.html

Guide To Flash Samsung GALAXY NOTE 4 

1. You must download all necessary file.(Samsung USB driver and Odin)
2. Then, install all driver to your computer or PC.
3. Extract Odin V3.11.1. file on the destination folder.
4. Switch Off your Samsung GALAXY NOTE 4 to start flashing process.
5. Then, run Odin3 v3.11.1 by right click on Odin.exe and select Run as Administrator.

   

   Flash Stock Firmware On Samsung GALAXY NOTE 4

6. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file. 

   

   Flash Stock Firmware On Samsung GALAXY NOTE 4

7. Now your firmware file has been inserted in Odin3 

   

   Flash Stock Firmware On Samsung GALAXY NOTE 4

8. Then, Enter download mode your Samsung GALAXY NOTE 4. See this guide how to do it. 

http://blogspot.com/2016/08/guide-how-to-enter-download-mode-on.html

9. On this mode, now connect your Samsung GALAXY NOTE 4 to your PC / laptop using a USB cable. 
10. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)

    

    Port Com Samsung GALAXY NOTE 4

11. Make sure re-partition is NOT ticked
12. When everything already you can click Start Button. at the bottom left corner
13. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
14. When complete it will display a notification PASS and your smartphone Samsung GALAXY NOTE 4 will automatically restart.
15. Wait your device to boot up, it will take a while.
16. When your Samsung GALAXY NOTE 4 is ready to use, now check your firmware version. See this guide how to check it. 
17. Finish.

http://blogspot.com/2016/08/how-to-check-samsung-galaxy-firmware-version.html